CMP嵌入式金属防爆堵头（747系列）

Recessed Stopper Plug, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory

• Provides means of blanking unused cable entries
• Temporary or permanent
• Tamper-proof (Type B) version available
• General purpose / industrial version available
• Nylon Ex e only version available (-20°C to +60°C)
• -60°C to +200°C (metallic versions)
• Globally marked, IECEx, ATEX, cCSAus & UL
• For use with threaded entry holes only – for stopper plugs suitable for use in clearance/through holes, please see 757 or 767
• Nylon stopper 717 / 717e to be used for sizes M20, M25, M32, 1⁄2″, 3⁄4″ and 1″

Please note: 747 Stopper Plugs have passed IP66 compliance tests to IEC 60529 with no additional sealing. However CMP would recommend the addition of thread sealant or grease (such as Dow Corning No. 4 Silicone) in order to help maintain IP66 and keep water out of the enclosure in the long-term. The addition of thread sealant or grease is permitted as long as it is non-setting, non-metallic and non-combustible in compliance with IEC 60079-14.

HOW TO ORDER
e.g. 747 – D – A – M – 3 – 1
= Dual Certified Ex d & Ex e- Type A – M25 – Aluminium

For Tamper-Proof Type B Stopper Plugs please substitute the letter A with the letter B in the ordering reference list below.

Other thread variations are available on request.

For further information on ordering please contact EPIN AUTOMATION.

PRODUCT SELECTION TABLE

 

Ordering Reference	Thread Size	Minimum Thread Length	Allen Key Size A/F
747DAM1	M16 X 1.5	15.0	M8
747DAM2	M20 X 1.5	15.0	M10
747DAM3	M25 X 1.5	15.0	M10
747DAM4	M32 X 1.5	15.0	M10
747DAM5	M40 X 1.5	15.0	M10
747DAM6	M50 X 1.5	15.0	M10
747DAM7	M63 X 1.5	15.0	M14
747DAM8	M75 X 1.5	15.0	M14
747DAM9	M90 X 2.0	24.0	M14
747DAM10	M100 x 2.0	24.0	M14
Dimensions displayed in millimeters unless otherwise stated
If a nylon stopper is required for sizes M20, M25, M32, 1⁄2", 3⁄4" and 1" please order717 or 717e.

TECHNICAL ILLUSTRATION